Skip to main content

A Product Development ,Prototyping & Contract Manufacturing Company in Akron Ohio

American Engineering Group (AEG) - Company Profile Presentation


Comments

Popular posts from this blog

AEG Torsional Damper - brief description

American Engineering Group (AEG) has developed a new “Dual Torsional Damper System”. This new AEG system design will allow varying static properties and provide dynamic shock and vibration mitigation over a wide load range for automotive and industrial applications. This dual structure system provides both axial and radial damping. The torsional damper system will have two elastomer elements with top element functions as a vibration damping element and the bottom spherical elastomer element as a noise & harness damping element. AEG dual mode damper system includes a spherical soft viscous bushing hub designed for being rigidly connected to a drive shaft, and an inertia ring, connected to the hub by means of a thin Polyurethane material layer. This dual-layer elastomer damper system is designed for torsional vibration reduction of the crankshaft system on multi-cylinder engine for vehicles. AEG polyurethane torsional dampers are designed to provide significant reduction of sou

Pressure penetration analysis of an air duct kiss seal

Seals are common structural components that often require design analyses. In this example, a nonlinear finite element analysis of seals is performed. Pressure penetration effects between the seal and the contacting surfaces are to be considered in these analyses, to make routine analyses of seals more realistic and accurate. Analyses of clutch seals, threaded connectors, car door seals and air duct kiss seals are some applications where pressure penetration effects are important. The surface-based pressure penetration capability is used to simulate pressure penetration between contacting surfaces.

Challenges in the Finite Element Analysis of Tire Design using ABAQUS

Finite Element Analysis of Vehicle and Tire has become a very important aspect of a tire design and failure analysis to most Tire companies. Tire modeling with ABAQUS is a very complicated process involving complex materials like hyperelastic rubber and textile reinforcements, large model size, prolonged simulation time and various convergence issues. This white paper intends to help in understanding the challenges in tire analysis and several tips and tricks that makes a difference in the quality of the results and processing time. AEG hopes that this article will be useful to ABAQUS users working in the field of tire design and analysis. A general tire has the following major tire components Tread Belt Region Inner Liner Sidewall Region Inner Carcass Region Bead Filler Region Apex/Chafer Region Beads Reinforcements Nylon Cap Ply Steel Belts Carcass Ply Constructing the structure of the tire and modeling of each component is the first step into the analysis. AEG foun