AEG Carbon Fiber-Polyurethane Solid Tire

AEG Carbon Fiber-Polyurethane Solid Tire

Military Tire-WHEEL (MTW) ASSEMBLY FOR Future tactical and combat vehicles is placing emphasis on handling, traction, and cornering tire performance for the light trucks. In order to meet these high performance standards, solid tire with aspect ratio lower than 0.35 have been developed by American Engineering Group (AEG), Akron, Ohio

Tire Size: LT225/35R19
Rim Width: 7.0 inches
Tread Width: 7.6inches
Overall Diameter: 25.0 inches
Speed rating:80mph

AEG aims to eliminate tire blowouts with its remarkable integrated Carbon Fiber Ring-Wheel “MTW” assembly, a solid one-piece wheel-and-tread system that could soon enter manufacturing. The MTW's rim is bonded to soft polyurethane foam that provides the shock-absorbing property of a traditional pneumatic tire. The circumference of the soft polyurethane foam layer is bonded to a Carbon Fiber ring along with tire tread. By varying the thickness and geometry of the polyurethane soft layer, this unique tire-wheel assembly can generate a wide array of ride and handling performance.

MTW’s vertical stiffness (ride comfort performance) and lateral stiffness (handling and cornering performance) can both be optimized, pushing the performance envelope in various military applications.

Comments

AEG Torsional Damper - brief description

American Engineering Group (AEG) has developed a new “Dual Torsional Damper System”. This new AEG system design will allow varying static properties and provide dynamic shock and vibration mitigation over a wide load range for automotive and industrial applications. This dual structure system provides both axial and radial damping. The torsional damper system will have two elastomer elements with top element functions as a vibration damping element and the bottom spherical elastomer element as a noise & harness damping element. AEG dual mode damper system includes a spherical soft viscous bushing hub designed for being rigidly connected to a drive shaft, and an inertia ring, connected to the hub by means of a thin Polyurethane material layer. This dual-layer elastomer damper system is designed for torsional vibration reduction of the crankshaft system on multi-cylinder engine for vehicles. AEG polyurethane torsional dampers are designed to provide significant reduction of sou...

Shell-to-solid submodeling and shell-to-solid coupling of a pipe joint

Submodeling is the technique used in ABAQUS for analyzing a local part of a model with a refined mesh, based on interpolation of the solution from an initial global model (usually with a coarser mesh) onto the nodes on the appropriate parts of the boundary of the submodel. Shell-to-solid submodeling models a region with solid elements, when the global model is made up of shell elements. Shell-to-solid coupling is a feature in ABAQUS by which three-dimensional shell meshes can be coupled automatically to three-dimensional solid meshes. The analysis is tested as a static process in ABAQUS/Standard

MEMS Labs

MEMS National Labs Compiled by AEG http://www.mems.sandia.gov/ http://mems.nist.gov/ http://www.darpa.mil/mto/programs/mems/index.html http://nepp.nasa.gov/index_nasa.cfm/789/ MEMS University Labs This is a comprehensive link to the University Labs working on MEMS area. The name of the Director of the Lab is provided for convenience. http://www.ece.cmu.edu/~mems/ Carnegie Mellon University – Dr Gary Fedder http://www.ece.umn.edu/groups/mems/ University of Minnesota http://www.biomems.uc.edu/ University of Cincinnati – Dr. Chong Ahn http://www.ece.uc.edu/devices/ University of Cincinnati – Dr. Jason Heikenfeld http://www.biomicro.uc.edu/ University of Cincinnati – Dr. Ian Papautsky http://mems.colorado.edu/ University of Colorado at Boulder – Dr. Victor Bright http://www.ece.neu.edu/groups/mfl/ Northeastern University http://www.enme.umd.edu/mml/ University of Maryland – Dr. Don DeVoe http://www.depts.ttu.edu/ntc/Re...

American Engineering Group LLC

Search This Blog